start
 
 
Technical Support
The ultimate UNICAM DEVELOPMENT TEAM
Best choice for best CAM solutions
Start

Compatibility List:
Deltacam TWIN
Unicam HW v4.0
 Unicam HW v3.0
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!
  Unicam old HW
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!

Tools&HowTo
Deltacam
Unicam
Programmer

Download area
Deltacam TWIN
Unicam HW v4.0
Unicam HW v3.0
Unicam HW v2.0
Unicam HW v1.0
Programmer

Technical Support
Download Unicam EVO HW v4.0 module FW
 
ATTENTION: This new UNICAM Firmware is only for use with UNICAM HW v4.0! Flashing with the new
NEW UNICAM LOADER for HW v4.01
download troja_v4.60
(25/11/2016)
  • fixed a bug on ORF P4xx ICE smartcards that didn't allow to run cards in Irdeto mode ;
download pacific_v4.60
(25/11/2016)
  • fixed a bug on ORF P4xx ICE smartcards that didn't allow to run cards in Irdeto mode ;
download troja_v4.59
(17/11/2016)
  • added support for OrangeFR Viaccess smartcards;
download pacific_v4.59
(17/11/2016)
  • added support for OrangeFR Viaccess smartcards;
download troja_v4.58
(04/11/2016)
  • added support for BiS-TV Viaccess smartcards;
  • fixed a bug on updating Fransat Viaccess smartcards in some circumstances;
  • fixed a bug that could have created stability issues;
download pacific_v4.58
(04/11/2016)
  • added support for BiS-TV Viaccess smartcards;
  • fixed a bug on updating Fransat Viaccess smartcards in some circumstances;
  • fixed a bug that could have created stability issues;
download troja_v4.57
(01/11/2016)
  • added support for CanalSat Viaccess smartcards;
download pacific_v4.57
(01/11/2016)
  • added support for CanalSat Viaccess smartcards;
  • fixed Telenet emulator;
download troja_v4.56
(16/09/2016)
  • fixed: TNTsat smartcards could not work in some cases;
download pacific_v4.56
(16/09/2016)
  • fixed: TNTsat smartcards could not work in some cases;
download troja_v4.54
(16/04/2016)
  • fixed a bug when writing EMM-GA to NDS smartcards;
download pacific_v4.54
(16/04/2016)
  • fixed a bug when writing EMM-GA to NDS smartcards;
download troja_v4.53
(22/03/2016)
  • updated tiers association for NDS sky de subscriptions;
  • updated translations for few MMI menus/voices;
  • fixed few small bugs on MMI when showing EMMs with short lenght;
  • added possibility to send custom EMMs to the card (check modbox file for more info in the section [smartcard] and [simcard]);
download pacific_v4.53
(22/03/2016)
  • updated tiers association for NDS sky de subscriptions;
  • updated translations for few MMI menus/voices;
  • fixed few small bugs on MMI when showing EMMs with short lenght;
  • added possibility to send custom EMMs to the card (check modbox file for more info in the section [smartcard] and [simcard]);
download pacific_v4.52
(14/03/2016)
  • fixed Telenet emulator;
download troja_v4.51
(15/02/2016)
  • paired V13&V14 of Sky DE (V13&V14 smartcards) working(you just have to insert the card and block emm like in past to prevent new pairing);
download pacific_v4.51
(15/02/2016)
  • paired V13&V14 of Sky DE (V13&V14 smartcards) working(you just have to insert the card and block emm like in past to prevent new pairing);
  • fixed Telenet emulator;
download pacific_v4.45
(03/02/2016)
  • fixed Telenet emulator;
download troja_v4.44
(29/01/2016)
  • fixed a bug that caused little drops in few cases during the channel switching;
download pacific_v4.44
(29/01/2016)
  • fixed a bug that caused little drops in few cases during the channel switching;
download troja_v4.41
(19/10/2015)
  • fixed UHD1 channel;
  • fixed the CAM message on smartcards where it was shown at each CAM init;
  • fixed a bug on closing/re-opening the same channel with DVBViewer and DigitalDevices dvb-cards;
  • added support for EMMs with double cards when both cards can support the same channel;
  • fixed HD03/HD03a/HD04 card's reinit;
  • added reading of tiers for HD03/HD03a/HD04;
  • added support for nano 01 on m7/telesat SECA 3 smartcards;
download pacific_v4.41
(19/10/2015)
  • fixed UHD1 channel;
  • fixed the CAM message on smartcards where it was shown at each CAM init;
  • fixed a bug on closing/re-opening the same channel with DVBViewer and DigitalDevices dvb-cards;
  • added support for EMMs with double cards when both cards can support the same channel;
  • fixed telenet emulator;
  • fixed HD03/HD03a/HD04 card's reinit;
  • added reading of tiers for HD03/HD03a/HD04;
  • added support for nano 01 on m7/telesat SECA 3 smartcards;
download troja_v4.40
(02/09/2015)
  • fixed a bug when applying the block_by07 option on modbox file;
  • fixed the showing of modbox block_bylen data in the menus;
  • added support for EMMs on HD+ HD03/HD03a smartcards;
  • fixed a bug on HD+ HD02 init when the card was previously inserted in the original CI+ cam;
  • added support for HD+ HD04 smartcard;
  • added a new code for managing the CAID list automatically, basically there's no more the need to use custom CAID lists, everything is managed automatically and/or on next CAM's reset (you will see a CAM's message when the CAID list will be updated);
  • changed the ECM/EMM pid list debug menus for a better understanding;
  • 3+ is now recognized on viaccess 5 smartcards;
  • fixed a bug on erasing data by CAM's menu in some circumstances;
  • added alternative mode support on hardware v4 too, this could be needed for few Philips/LG TVs because the new default mode is used to have a better performance on Panasonic and Samsung TVs;
  • improved performance by Samsung TVs (H- and J-series);
download troja_v4.30
(15/07/2015)
  • fixed the reading of HD+ (HD01/HD02 smartcards) expiring date on entitlements menu;
  • fixed Indovision Videoguard 09C1 smartcard reading;
  • added management of Conax smartcards mature rating options;
  • in the Info menu for NDS smartcards you can see now the payload for nano 0F 06;
  • removed the sky de anti-pairing option because it is obsolete, you can still use the modbox file to add filters on EMM's len (applied to all codifies);
  • added the possibility to block/block-by-len/log EMMs, you can see last 5 EMMs in the EMM data menu and can decide to send one of them to the card;
  • added support for HD+ HD03/HD03a smartcards (ECM only, no updates and no entitlements support currently, work in progress);
download troja_v4.23
(12/06/2015)
  • fixed a bug when AutoPMT was enabled not allowing anymore to get a valid PMT;
  • fixed the reading of entitlements on NDS smartcards;
  • fixed the association between chid/tiers (NDS, cryptoworks, irdeto and so on) and packages on entitlements menu;
  • added warning messages when enabling autopmt and blockers for EMMs to prevent users doing the wrong thing;
download troja_v4.22
(02/03/2015)
  • fixed potential crash when entering the smartcard's info menu;
  • reset of settings is applied because of changed default value for nds fastmode and prevent sky DE marriage options;
  • fixed a bug on showing serial number for betacrypt smartcards in the info menu;
  • reorganized the entitlements menu for all codifies with a better output;
  • fixed MTD for tivusat (and all channels that uses same provider and ecm pid);
  • fixed the setting of FastMode on some smartcards not working previously;
  • added management of cases when a fake ECM or corrupted data is received (this will prevent freezes on TV);
download troja_v4.21
(07/01/2015)
  • fixed a bug on cam init with enigma2 images;
  • improved the switching of dynamic caid;
  • fixed a bug when AutoPMT was set to on that didn't allow to update ecm pids;
  • CAT is now processed also on FTA channels if the host sends the PMT;
  • fixed a bug introduced on version 4.18 when resetting smartcards;
  • fixed a bug when managing errors that occur on smartcards;
download troja_v4.20
(30/12/2014)
  • fixed humax icord recordings bug introduced on version 4.18;
  • fixed booting issues introduced with version 4.18 on Topfield TF7700;
  • reverted back the force nagra mode to "yes" by default (seems a better solution for most of cards);
download troja_v4.19
(17/12/2014)
  • fixed a bug introduced on version 4.18 that was locking the CAM when switching channel and the CAT wasn't downloaded yet;
download troja_v4.18
(15/12/2014)
  • fixed a bug on filtering EMMs in few rare cases were they were discarded by the hardware (this fixes totally the problem of updates with SRG);
  • improved the booting of the CAM with devices that are using too strict timings on boot;
  • added support for 0D98 ICE smartcard;
  • rewrote the code for managing PMTs better and safer;
  • added ChIDs on Irdeto smartcard entitlements menu;
  • default caid list is now updated according to latest changes;
  • fixed a bug on sending EMMs to betacrypt tunneled smartcards;
download troja_v4.17
(07/11/2014)
  • fixed a minor bug on boot for few Samsung TVs;
  • tier ID is now shown on NDS smartcards menu;
  • added block of Sky DE 07 EMMs;
download troja_v4.16
(15/10/2014)
  • fixed a minor bug on settings that could imply the EMMs stop to work;
  • Fuse Byte value is now shown on NDS smartcards menu;
download troja_v4.15
(08/10/2014)
  • fixed the latency on NDS smartcard boot;
  • if you switch from troja to pacific settings are now kept the same;
  • improved handling of ECMs and EMMs when the first ECM pid selected fails;
  • fixed the smartcard reset counter in the CAM's menu;
download troja_v4.14
(29/09/2014)
  • fixed TNTsat smartcard support for HD channels;
download troja_v4.13
(15/09/2014)
  • fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues;
  • added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file);
  • fixed a regression bug on Viasat 090F NDS smartcards;
  • fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel;
download troja_v4.12
(28/08/2014)
  • improved code for NDS smartcards (999x errors should be prevented from now on);
download troja_v4.11
(08/07/2014)
  • added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels;
download troja_v4.10
(25/06/2014)
  • reverted changes done on version 4.07 for nagravision cards, this fixes freeze problems
  • fixed TNTsat smartcard support with latest changes of 24/06/2014 (SD and HD channels);
download troja_v4.09
(25/06/2014)
  • fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels);
download troja_v4.08
(18/06/2014)
  • improved priority management for smartcard's updates;
  • fixed TNTsat smartcard support;
download troja_v4.07
(03/06/2014)
  • fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer;
  • fixed TNTsat smartcard support;
download troja_v4.06
(03/06/2014)
  • fixed descrambling of CSat smartcard on HD channels
download troja_v4.05
(25/05/2014)
  • fixed KD K02 smartcard reading
  • rearranged CAM's menu for smartcards
  • fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
  • improved seca EMM handling in case of 2 or more providers used together in the same card
  • fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
  • fixed a bug on factory reset when expert menu is enabled
download troja_v4.04
(22/04/2014)
  • CSat smartcards SECA 3 pairing on HD channels (nano 01);
  • Fransat smartcards reading support
download troja_v4.02
(07/04/2014)
  • fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
  • fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
  • fixed a bug with MTD on Kathrein STBs
  • added support for 8x MTD channels
download troja_v4.01
(03/04/2014)
  • New completely revised firmware
  • Better usability;
  • Multilingual Menu;
  • Advanced expert menu;
  • Fastmode (for NDS Smartkart's:V13, V14 or G09);
  • Alpha Crypt Simulator;
  • Extensive debugging information menu;
  • And many more options (blocker, CAID, EMM ....);
  • CAID dynamic management;
  • Fixed support for:Kathrein, DM7020, Technisat,TechniStar,TechniVision and Philips,Toshiba,Panasonic, Technisat, Philips, Sharp, LG, Loewe, Metz, Humax, Kathrein, Medion, SVS Skyvision, Technisat, Topfield, Xoro, KNC One, TBS;
  • Added new smart cards and generally improves the Smart Card Compatibility
  • Exclusively available in the current firmware:
  • CSAT SECA smartcard 3 pairing on HD channels (nano 01);
  • Fransat smart cards reading support;
  • Telenet (Belgium) emulation;
  • Emulator Key Editor added;
  • Soft Viasat NDS Emulator;
  • TNT SAT Emu including HD, card reading support as well (HD / SD);
  • SRG SSR Emu added (key 08 required);
  • Added ziggo provider support;
download Unicam HW v4.0
(03/04/2014)
  • Factory SW for HW v4.0