start
 
 
Technical Support
The ultimate UNICAM DEVELOPMENT TEAM
Best choice for best CAM solutions
Start

Compatibility List:
Deltacam TWIN
Unicam HW v4.0
 Unicam HW v3.0
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!
  Unicam old HW
- TV Liste new!!!
- Receiver Liste new!!!
- DVB-PC Card new!!!

Tools&HowTo
Deltacam
Unicam
Programmer

Download area
Deltacam TWIN
Unicam HW v4.0
Unicam HW v3.0
Unicam HW v2.0
Unicam HW v1.0
Programmer

Technical Support
Download DELTACAM TWIN module FW
 
ATTENTION: This Firmware is for use with DELTACAM TWIN HW v1.0 and v2.0!!! Flashing with the
DeltaCam Loader from DeltaCam Download Area!!!!
download Cobra v02.23
(13/12/2018)
  • added support for sky de v13 nds smartcards (v14 and v15 coming soon). Special thanks to our new team member from Switzerland;
download Python v02.23
(13/12/2018)
  • added support for sky de v13 nds smartcards (v14 and v15 coming soon). Special thanks to our new team member from Switzerland;
download Cobra v02.22
(13/11/2018)
  • added support for MaxTV CAK7 smartcards;
download Python v02.22
(13/11/2018)
  • added support for MaxTV CAK7 smartcards;
download Cobra v02.21
(08/11/2018)
  • added support for Fransat and CSat Viacces 5/6 smartcards;
download Python v02.21
(08/11/2018)
  • added support for Fransat and CSat Viacces 5/6 smartcards;
download Cobra v02.20
(26/10/2018)
  • added support for skylink M7 and ICE smartcards in Irdeto mode (and could work with other Irdeto smartcards too, we can't test them all);
  • added SRG emulator;
download Python v02.20
(26/10/2018)
  • added support for skylink M7 and ICE smartcards in Irdeto mode (and could work with other Irdeto smartcards too, we can't test them all);
download Cobra v02.10
(25/11/2016)
  • fixed a bug on ORF P4xx ICE smartcards that didn't allow to run cards in Irdeto mode;
download Python v02.10
(25/11/2016)
  • fixed a bug on ORF P4xx ICE smartcards that didn't allow to run cards in Irdeto mode;
download Cobra v02.09
(17/11/2016)
  • added support for OrangeFR Viaccess smartcards;
download Python v02.09
(17/11/2016)
  • added support for OrangeFR Viaccess smartcards;
download Cobra v02.08
(04/11/2016)
  • added support for BiS-TV Viaccess smartcards;
  • fixed a bug on updating Fransat Viaccess smartcards in some circumstances;
  • fixed a bug that could have created stability issues;
download Python v02.08
(04/11/2016)
  • added support for BiS-TV Viaccess smartcards;
  • fixed a bug on updating Fransat Viaccess smartcards in some circumstances;
  • fixed a bug that could have created stability issues;
download Cobra v02.07
(01/11/2016)
  • added support for CanalSat Viaccess smartcards;
  • fixed Telenet emulator;
download Python v02.07
(01/11/2016)
  • added support for CanalSat Viaccess smartcards;
download Cobra v02.06
(16/09/2016)
  • TNTsat smartcards could not work in some cases;
download Python v02.06
(16/09/2016)
  • TNTsat smartcards could not work in some cases;
download Cobra v02.04
(16/04/2016)
  • fixed a bug when writing EMM-GA to NDS smartcards;
download Python v02.04
(16/04/2016)
  • fixed a bug when writing EMM-GA to NDS smartcards;
download Cobra v02.03
(22/03/2016)
  • updated tiers association for NDS sky de subscriptions;
  • updated translations for few MMI menus/voices;
  • fixed few small bugs on MMI when showing EMMs with short lenght;
  • added possibility to send custom EMMs to the card (check modbox file for more info in the section [smartcard] and [simcard]);
download Python v02.03
(22/03/2016)
  • updated tiers association for NDS sky de subscriptions;
  • updated translations for few MMI menus/voices;
  • fixed few small bugs on MMI when showing EMMs with short lenght;
  • added possibility to send custom EMMs to the card (check modbox file for more info in the section [smartcard] and [simcard]);
download Cobra v02.02
(14/03/2016)
  • fixed Telenet emulator;
download Cobra v02.01
(15/02/2016)
  • paired V13&V14 of Sky DE (V13&V14 smartcards) working(you just have to insert the card and block emm like in past to prevent new pairing);
  • fixed Telenet emulator;
download Python v02.01
(15/02/2016)
  • paired V13&V14 of Sky DE (V13&V14 smartcards) working(you just have to insert the card and block emm like in past to prevent new pairing);
download Cobra v01.95
(02/03/2016)
  • fixed Telenet emulator;
download Cobra v01.94
(29/01/2016)
  • fixed a bug that caused little drops in few cases during the channel switching;
download Python v01.94
(29/01/2016)
  • fixed a bug that caused little drops in few cases during the channel switching;
download Cobra v01.93
(15/12/2015)
  • added support for nano 01 on Canal Digitaal NL SECA 3 smartcards;
  • added support for nano 01 on TV Vlaanderen SECA 3 smartcards;
  • fixed a bug when using a combination of EMM blocker settings;
  • fixed a bug on unstable HD+ HD02 smartcards;
  • fixed HD+ HD04 smartcard freezing/dropouts;
  • fixed downloading of PMT when using FloppyDTV and AutoPMT in case it sends a corrupted PMT over the standard protocol;
  • a/v pids are now released when a failing CW is found, this helps few recording devices to fix recorded streams;
  • fixed the download of CAT to allow EMMs also on devices where the AutoPMT fails;
  • fixed the downloading of multi PMTs for different SIDs on the same PID in case of AutoPMT;
download Python v01.93
(15/12/2015)
  • added support for nano 01 on Canal Digitaal NL SECA 3 smartcards;
  • added support for nano 01 on TV Vlaanderen SECA 3 smartcards;
  • fixed a bug when using a combination of EMM blocker settings;
  • fixed a bug on unstable HD+ HD02 smartcards;
  • fixed HD+ HD04 smartcard freezing/dropouts;
  • fixed downloading of PMT when using FloppyDTV and AutoPMT in case it sends a corrupted PMT over the standard protocol;
  • a/v pids are now released when a failing CW is found, this helps few recording devices to fix recorded streams;
  • fixed the download of CAT to allow EMMs also on devices where the AutoPMT fails;
  • fixed the downloading of multi PMTs for different SIDs on the same PID in case of AutoPMT;
download Cobra v01.91
(19/10/2015)
  • fixed UHD1 channel;
  • fixed the CAM message on smartcards where it was shown at each CAM init;
  • fixed a bug on closing/re-opening the same channel with DVBViewer and DigitalDevices dvb-cards;
  • added support for EMMs with double cards when both cards can support the same channel;
  • fixed telenet emulator;
  • fixed HD03/HD03a/HD04 card's reinit;
  • added reading of tiers for HD03/HD03a/HD04;
  • added support for nano 01 on m7/telesat SECA 3 smartcards;
download Python v01.91
(19/10/2015)
  • fixed UHD1 channel;
  • fixed the CAM message on smartcards where it was shown at each CAM init;
  • fixed a bug on closing/re-opening the same channel with DVBViewer and DigitalDevices dvb-cards;
  • added support for EMMs with double cards when both cards can support the same channel;
  • fixed HD03/HD03a/HD04 card's reinit;
  • added reading of tiers for HD03/HD03a/HD04;
  • added support for nano 01 on m7/telesat SECA 3 smartcards;
download Cobra v01.90
(02/09/2015)
  • fixed a bug when applying the block_by07 option on modbox file;
  • fixed the showing of modbox block_bylen data in the menus;
  • added support for EMMs on HD+ HD03/HD03a smartcards;
  • fixed a bug on HD+ HD02 init when the card was previously inserted in the original CI+ cam;
  • added support for HD+ HD04 smartcard;
  • added a new code for managing the CAID list automatically, basically there's no more the need to use custom CAID lists, everything is managed automatically and/or on next CAM's reset (you will see a CAM's message when the CAID list will be updated);
  • changed the ECM/EMM pid list debug menus for a better understanding;
  • 3+ is now recognized on viaccess 5 smartcards;
  • fixed a bug on erasing data by CAM's menu in some circumstances;
  • added alternative mode support on hardware v2 too, this could be needed for few Philips/LG TVs because the new default mode is used to have a better performance on Panasonic and Samsung TVs;
  • improved performance by Samsung TVs (H- and J-series);
download Python v01.90
(02/09/2015)
  • fixed a bug when applying the block_by07 option on modbox file;
  • fixed the showing of modbox block_bylen data in the menus;
  • added support for EMMs on HD+ HD03/HD03a smartcards;
  • fixed a bug on HD+ HD02 init when the card was previously inserted in the original CI+ cam;
  • added support for HD+ HD04 smartcard;
  • added a new code for managing the CAID list automatically, basically there's no more the need to use custom CAID lists, everything is managed automatically and/or on next CAM's reset (you will see a CAM's message when the CAID list will be updated);
  • changed the ECM/EMM pid list debug menus for a better understanding;
  • 3+ is now recognized on viaccess 5 smartcards;
  • fixed a bug on erasing data by CAM's menu in some circumstances;
  • added alternative mode support on hardware v2 too, this could be needed for few Philips/LG TVs because the new default mode is used to have a better performance on Panasonic and Samsung TVs;
  • improved performance by Samsung TVs (H- and J-series);
download Cobra v01.80
(15/07/2015)
  • fixed the reading of HD+ (HD01/HD02 smartcards) expiring date on entitlements menu;
  • fixed Indovision Videoguard 09C1 smartcard reading;
  • added management of Conax smartcards mature rating options;
  • in the Info menu for NDS smartcards you can see now the payload for nano 0F 06;
  • removed the sky de anti-pairing option because it is obsolete, you can still use the modbox file to add filters on EMM's len (applied to all codifies);
  • added the possibility to block/block-by-len/log EMMs, you can see last 5 EMMs in the EMM data menu and can decide to send one of them to the card;
  • added support for HD+ HD03/HD03a smartcards (ECM only, no updates and no entitlements support currently, work in progress);
download Python v01.80
(15/07/2015)
  • fixed the reading of HD+ (HD01/HD02 smartcards) expiring date on entitlements menu;
  • fixed Indovision Videoguard 09C1 smartcard reading;
  • added management of Conax smartcards mature rating options;
  • in the Info menu for NDS smartcards you can see now the payload for nano 0F 06;
  • removed the sky de anti-pairing option because it is obsolete, you can still use the modbox file to add filters on EMM's len (applied to all codifies);
  • added the possibility to block/block-by-len/log EMMs, you can see last 5 EMMs in the EMM data menu and can decide to send one of them to the card;
  • added support for HD+ HD03/HD03a smartcards (ECM only, no updates and no entitlements support currently, work in progress);
download Cobra v01.74
(12/06/2015)
  • [QUICK FIX] Auto PMT was not working properly anymore, resulting in very long channel switching delays;
  • [QUICK FIX] Fixed potential issue when reading NDS VideoGuard entitlements, e.g. not showing all of them for some Sky V13 SmartCards;
  • Warnings are now shown when trying to enable Auto PMT or any kind of EMM Blocker as people tend to enable them without having a clue about the consequences;
download Python v01.74
(12/06/2015)
  • [QUICK FIX] Auto PMT was not working properly anymore, resulting in very long channel switching delays;
  • [QUICK FIX] Fixed potential issue when reading NDS VideoGuard entitlements, e.g. not showing all of them for some Sky V13 SmartCards;
  • Warnings are now shown when trying to enable Auto PMT or any kind of EMM Blocker as people tend to enable them without having a clue about the consequences;
download Cobra v01.73
(02/03/2015)
  • fixed potential crash when entering the smartcard's info menu;
  • reset of settings is applied because of changed default value for nds fastmode and prevent sky DE marriage options;
  • fixed a bug on showing serial number for betacrypt smartcards in the info menu;
  • reorganized the entitlements menu for all codifies with a better output;
  • fixed MTD for tivusat (and all channels that uses same provider and ecm pid);
  • fixed the setting of FastMode on some smartcards not working previously;
  • added management of cases when a fake ECM or corrupted data is received (this will prevent freezes on TV);
download Python v01.73
(02/03/2015)
  • fixed potential crash when entering the smartcard's info menu;
  • reset of settings is applied because of changed default value for nds fastmode and prevent sky DE marriage options;
  • fixed a bug on showing serial number for betacrypt smartcards in the info menu;
  • reorganized the entitlements menu for all codifies with a better output;
  • fixed MTD for tivusat (and all channels that uses same provider and ecm pid);
  • fixed the setting of FastMode on some smartcards not working previously;
  • added management of cases when a fake ECM or corrupted data is received (this will prevent freezes on TV);
download Cobra v01.72
(07/01/2015)
  • fixed a bug on cam init with enigma2 images;
  • improved the switching of dynamic caid;
  • fixed a bug when AutoPMT was set to on that didn't allow to update ecm pids;
  • CAT is now processed also on FTA channels if the host sends the PMT;
  • fixed a bug introduced on version 1.69 when resetting smartcards;
  • fixed a bug when managing errors that occur on smartcards;
download Python v01.72
(07/01/2015)
  • fixed a bug on cam init with enigma2 images;
  • improved the switching of dynamic caid;
  • fixed a bug when AutoPMT was set to on that didn't allow to update ecm pids;
  • CAT is now processed also on FTA channels if the host sends the PMT;
  • fixed a bug introduced on version 1.69 when resetting smartcards;
  • fixed a bug when managing errors that occur on smartcards;
download Cobra v01.71
(30/11/2014)
  • fixed humax icord recordings bug introduced on version 1.69;
  • fixed booting issues introduced with version 1.68 on Topfield TF7700;
  • reverted back the force nagra mode to "yes" by default (seems a better solution for most of cards);
download Python v01.71
(30/11/2014)
  • fixed humax icord recordings bug introduced on version 1.69;
  • fixed booting issues introduced with version 1.68 on Topfield TF7700;
  • reverted back the force nagra mode to "yes" by default (seems a better solution for most of cards);
download Cobra v01.70
(17/12/2014)
  • fixed a bug introduced on version 1.69 that was locking the CAM when switching channel and the CAT wasn't downloaded yet;
download Python v01.70
(17/12/2014)
  • fixed a bug introduced on version 1.69 that was locking the CAM when switching channel and the CAT wasn't downloaded yet;
download Cobra v01.69
(15/12/2014)
  • fixed a bug on filtering EMMs in few rare cases were they were discarded by the hardware (this fixes totally the problem of updates with SRG);
  • improved the booting of the CAM with devices that are using too strict timings on boot;
  • added support for 0D98 ICE smartcard;
  • rewrote the code for managing PMTs better and safer;
  • added ChIDs on Irdeto smartcard entitlements menu;
  • default caid list is now updated according to latest changes;
  • fixed a bug on sending EMMs to betacrypt tunneled smartcards;
  • fixed Idman TV channel for Digiturk cryptoworks emulator;
download Python v01.69
(15/12/2014)
  • fixed a bug on filtering EMMs in few rare cases were they were discarded by the hardware (this fixes totally the problem of updates with SRG);
  • improved the booting of the CAM with devices that are using too strict timings on boot;
  • added support for 0D98 ICE smartcard;
  • rewrote the code for managing PMTs better and safer;
  • added ChIDs on Irdeto smartcard entitlements menu;
  • default caid list is now updated according to latest changes;
  • fixed a bug on sending EMMs to betacrypt tunneled smartcards;
download Cobra v01.68
(07/11/2014)
  • fixed a minor bug on boot for few Samsung TVs;
  • tier ID is now shown on NDS smartcards menu;
  • added block of Sky DE 07 EMMs;
download Python v01.68
(07/11/2014)
  • fixed a minor bug on boot for few Samsung TVs;
  • tier ID is now shown on NDS smartcards menu;
  • added block of Sky DE 07 EMMs;
download Cobra v01.67
(15/10/2014)
  • fixed TNTsat emulator on channels with multi pids;
  • fixed a minor bug on settings that could imply the EMMs stop to work;
  • Fuse Byte value is now shown on NDS smartcards menu;
download Python v01.67
(15/10/2014)
  • fixed a minor bug on settings that could imply the EMMs stop to work;
  • Fuse Byte value is now shown on NDS smartcards menu;
download Cobra v01.66
(08/10/2014)
  • fixed the latency on NDS smartcard boot;
  • if you switch from python to cobra settings are now kept the same;
  • improved handling of ECMs and EMMs when the first ECM pid selected fails;
  • fixed the smartcard reset counter in the CAM's menu;
download Python v01.66
(08/10/2014)
  • fixed the latency on NDS smartcard boot;
  • if you switch from python to cobra settings are now kept the same;
  • improved handling of ECMs and EMMs when the first ECM pid selected fails;
  • fixed the smartcard reset counter in the CAM's menu;
download Cobra v01.65
(29/09/2014)
  • fixed TNTsat smartcard support for HD channels;
  • fixed TNTsat emulator support for HD channels;
  • fixed ANT1 viaccess emulator;
download Python v01.65
(29/09/2014)
  • fixed TNTsat smartcard support for HD channels;
download Cobra v01.64
(15/09/2014)
  • fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues;
  • added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file);
  • fixed a regression bug on Viasat 090F NDS smartcards;
  • fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel;
download Python v01.64
(15/09/2014)
  • fixed a compatibility issue with Panasonic TVs when using Sky Germany smartcards that were creating CI communication issues;
  • added an option on the CAM's menu to prevent the pairing on Sky Germany smartcards (if you want to manage it manually check the blockemm-bylen function on RSA-Box key file);
  • fixed a regression bug on Viasat 090F NDS smartcards;
  • fixed a rare bug with Sky Italy 09CD smartcards when trying to open a channel;
download Cobra v01.63
(28/08/2014)
  • fixed a bug on bulsatcom emulator
  • improved code for NDS smartcards (999x errors should be prevented from now on);
download Python v01.63
(28/08/2014)
  • improved code for NDS smartcards (999x errors should be prevented from now on);
download Cobra v01.62
(08/07/2014)
  • added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels;
download Python v01.62
(08/07/2014)
  • added TNTsat auto update for ECM keys, this fixes TNTsat for SD channels;
download Cobra v01.61
(25/06/2014)
  • reverted changes done on version 1.58 for nagravision cards, this fixes freeze problems;
  • fixed TNTsat smartcard support with latest changes of 24/06/2014 (SD and HD channels);
  • fixed TNTsat emulator support with latest changes of 24/06/2014 (SD and HD channels);
download Python v01.61
(25/06/2014)
  • reverted changes done on version 1.58 for nagravision cards, this fixes freeze problems;
  • fixed TNTsat smartcard support with latest changes of 24/06/2014 (SD and HD channels);
download Cobra v01.60
(25/06/2014)
  • fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels);
  • fixed TNTsat emulator support with latest changes of 20/06/2014 (only SD channels);
download Python v01.60
(25/06/2014)
  • fixed TNTsat smartcard support with latest changes of 20/06/2014 (only SD channels);
download Cobra v01.59
(18/06/2014)
  • improved priority management for smartcard's updates;
  • fixed TNTsat smartcard support;
  • fixed TNTsat emulator support;
download Python v01.59
(18/06/2014)
  • improved priority management for smartcard's updates;
  • fixed TNTsat smartcard support;
download Cobra v01.58
(12/06/2014)
  • fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer;
  • fixed TNTsat smartcard support;
  • fixed TNTsat emulator support;
download Python v01.58
(12/06/2014)
  • fixed a bug on managing MTD channels with DigitalDevices when using XBMC in combination with DVBViewer;
  • fixed TNTsat smartcard support;
download Cobra v01.57
(03/06/2014)
  • fixed descrambling of CSat smartcard on HD channels
download Python v01.57
(03/06/2014)
  • fixed descrambling of CSat smartcard on HD channels
download Cobra v01.56
(27/05/2014)
  • fixed a bug on editing keys and not allowing further changes
  • fixed KD K02 smartcard reading
  • rearranged CAM's menu for smartcards
  • fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
  • improved seca EMM handling in case of 2 or more providers used together in the same card
  • fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
download Python v01.56
(27/05/2014)
  • fixed KD K02 smartcard reading
  • rearranged CAM's menu for smartcards
  • fixed a compatibility issue with Vantage STBs in case dynamic caid is enabled
  • improved seca EMM handling in case of 2 or more providers used together in the same card
  • fixed a bug on selecting ecm pid correctly in case of multi-provider smartcard
download Cobra v01.55
(07/04/2014)
  • fixed NDS sky de v13 smartcard with Fastmode+ enabled
download Python v01.55
(07/04/2014)
  • fixed NDS sky de v13 smartcard with Fastmode+ enabled
download Cobra v01.53
(07/04/2014)
  • fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
  • fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
  • support for hardware 2.0
  • fixed a bug with MTD on Kathrein STBs
  • added support for 8x MTD channels
download Python v01.53
(07/04/2014)
  • fixed a bug on setting EMM pids for updates with Seca Canal Digitaal smartcards on few channels
  • fixed updates for viaccess 2.6, 4.0 and 5.0 SRG cards
  • support for hardware 2.0
  • fixed a bug with MTD on Kathrein STBs
  • added support for 8x MTD channels
download Deltacrypt
(16/09/2013)
  • Deltacam factory SW